Community
Events
Servers
Server List
HL Stats
Sourcebans
7d2d PvE Map
Minecraft ATM3 Map
Get Some
/
General
/
Technology & Hardware
(Moderator:
Xenolightning
) /
PCIe help
Add to Reputation:
What do you think of this post?
I agree
I disagree
Comment:
Topic: PCIe help
bigROBOTbill
Addicted
Posts: 4,213
Hi team, I have 2 GTX460's running in SLi, one's a Leadteck, one's a Palit. Both have the same core speeds etc. Just looking at them using CPU-Z and the Leadteck card has the PCIe 2.0 x16 @162.0, the Palit one is pCIe 2.0x16 @82. That seems like the second one isn't running at full power. Both have the latest bios updates as far as I can tell and I checked in NVIDEA control panel and I have it set to maximum power.
Anything else I can check? Does it make a difference?
The motherboard is an XFX 750i, could there be something in the MB bios perhaps.
Posted: June 22, 2013, 10:56:32 am
Flickr
mycoolcar
Addicted
Posts: 4,528
What does the 162 & 82 refer to? Can you post a screenshot of it?
Reply #1 Posted: June 22, 2013, 11:05:14 am
Click here to join our MAV Riding Platoon
bigROBOTbill
Addicted
Posts: 4,213
It says this in the bus interface, I'll post a couple of screens when I get home MCC.
Reply #2 Posted: June 22, 2013, 11:18:57 am
Flickr
swindle
Hero Member
Posts: 12,699
That mobo can do SLi with 2 lanes at 16x?
EDIT: Its running at 8x, thus the numbers.
http://www.gameplanet.co.nz/pc/reviews/132591.XFX-750I-motherboard-review/
PCI-E x16: 2 x PCI-E Gen2 (16x + 8x in SLI)
Last Edit: June 22, 2013, 12:53:25 pm by swindle
Reply #3 Posted: June 22, 2013, 12:49:41 pm
If we hit that bullseye, the rest of the dominoes should fall like a house of cards. Checkmate.
bigROBOTbill
Addicted
Posts: 4,213
Here are the screenshots, so this is normal then swindle? One will only run at 162 and the other at 82?
[ATTACH=CONFIG]7926[/ATTACH][ATTACH=CONFIG]7927[/ATTACH]
Actually after doing more of a search and it seems that it shouldn't make too much difference apparently.
Last Edit: June 22, 2013, 01:15:32 pm by bigROBOTbill
Reply #4 Posted: June 22, 2013, 01:05:55 pm
Flickr
Emrico1
Hero Member
Posts: 13,891
This^ AFAIK, as long as you are getting X8, it should not be a noticeable bottleneck.
It only becomes an issue @ x4
Reply #5 Posted: June 22, 2013, 03:14:54 pm
bigROBOTbill
Addicted
Posts: 4,213
Thanks chaps, though strangely after setting the jumper on the MB to allow oveclocking, both of them show as 162 now.
Not having much luck overclocking though, and i have stock cooling so I guess I can't expect too much.
XFX bios updates are nowhere to b found, my board is seen as a Microstar one.
Reply #6 Posted: June 22, 2013, 04:44:36 pm
Flickr
swindle
Hero Member
Posts: 12,699
No games, or software (afaik) can even make use of 2 GPUs at 100%.
Reply #7 Posted: June 23, 2013, 01:04:03 am
If we hit that bullseye, the rest of the dominoes should fall like a house of cards. Checkmate.
Dr. Acula
Just settled in
Posts: 854
All it means is one card is in x16 slot and the other is in the 8x slot, both slots are PCI-e 2.0 and it'll run them at 8x speed. but as Swindle and Emrico said, you won't notice any difference in performance during gaming etc, even if they are at the 'slower' 8x speed
Reply #8 Posted: June 23, 2013, 02:34:26 am
Dr. λculał
i5 3570K @ 4.5Ghz | Corsair H100i Push/Pull | Gigabyte G1.Sniper 3 | 8GB Patriot Viper Xtreme @ 2000MHz | 2x ASUS DirectCU II 7970 3GB @ 1000/1400 | 2x Mushkin Chronos Deluxe 240GB Raid0 | 2x Seagate Barracuda 1TB | Corsair AX1200W Gold | Raidmax Platinum
Print
Pages: [
1
]
Get Some
/
General
/
Technology & Hardware
(Moderator:
Xenolightning
) /
PCIe help